PU Foam Edge Protector (SAB) – 60mm x 20mm x 1m

Product Information

Polyurethane Foam Edge Protector – 60mm x 20mm

Protect your infrastructure, equipment, and personnel with RubberSmart’s premium flat foam surface protectors. Manufactured from high-density, flexible polyurethane (PU) foam, this 60mm wide by 20mm thick profile provides exceptional impact absorption for flat walls, low ceilings, and broad machinery faces.

Featuring bold yellow and black hazard stripes, this bumper maximizes visibility to prevent accidents before they happen. It is the ideal safety solution for high-traffic warehouses, manufacturing plants, and commercial loading bays.

Why Choose This Bumper?

• High Impact Absorption: Resilient 20mm thick polyurethane foam absorbs heavy shocks and returns to its original shape.
• Low-Profile Surface Cushioning: Flat 60mm wide design provides broad protection without protruding excessively into walkways.
• Peel-and-Stick Installation: Pre-applied high-bond self-adhesive tape ensures quick, tool-free mounting on clean surfaces.
• Maximum Hazard Visibility: Vibrant yellow and black stripes visually alert workers to low-clearance obstructions and flat impact zones.
• Weather & Chemical Resistant: Tough outer skin resists moisture, oils, UV light, and temperature fluctuations.

Applications

• Low-ceiling beams, lintels, and overhead hazards
• Warehouse walls, pillars, and columns near forklift routes
• Loading dock walls and backing zones
• Industrial machinery faces and automated equipment enclosures
• Workstation borders and garage wall backing

How to Install

Follow these simple steps for a secure, long-lasting bond:

1. Clean the surface: Wipe the corner with a degreasing agent to remove all dust, oil, and moisture.
2. Dry thoroughly: Ensure the surface is completely dry before proceeding.
3. Measure and cut: Use a sharp utility knife or saw to cut the 1-metre strip to your required length.
4. Peel the backing: Partially peel back the protective liner from the pre-applied self-adhesive tape.
5. Align and press: Align the protector flat against the surface.
6. Apply firm pressure: Press firmly across the entire 60mm width and along the length of the foam strip to activate the high-bond adhesive.

If this is not the product you are looking for, take a look at the rest of our range of edge and corner protectors.