PU Foam Edge Protector (SAB) – 40mm x 40mm x 1m

Product Information

Polyurethane Foam Edge Protector – 40mm x 40mm

Protect your infrastructure, equipment, and personnel with RubberSmart’s premium trapezoid foam edge protectors with an internal channel profile. Manufactured from high-density, flexible polyurethane (PU) foam, this 40mm x 40mm profile features an 8mm slot designed to slide directly onto exposed sheet metal, glass panels, or thin structural flanges.

Featuring bold yellow and black hazard stripes, this bumper maximizes visibility to prevent accidents before they happen. Its sloped trapezoidal sides provide a clean, modern aesthetic while effectively deflecting impacts from passing machinery and personnel.

Why Choose This Bumper?

• High Impact Absorption: Resilient polyurethane foam absorbs heavy shocks and returns to its original shape.
• Deflective Trapezoid Design: Sloped outer profile deflects glancing blows and softens thin, dangerous exposed edges.
• Peel-and-Stick Installation: Pre-applied high-bond self-adhesive tape ensures quick, tool-free mounting on clean surfaces.
• Maximum Hazard Visibility: Vibrant yellow and black stripes visually alert workers to low-clearance obstructions and flat impact zones.
• Weather & Chemical Resistant: Tough outer skin resists moisture, oils, UV light, and temperature fluctuations.

Applications

• Exposed sheet metal edges and machinery guards
• Glass panels, partitions, and structural panes
• Metal racking lips and thin steel beams
• Industrial machinery chassis and vehicle panels
• Conveyor system guardrails and walkways

How to Install

Follow these simple steps for a secure, long-lasting bond:

1. Clean the surface: Wipe the corner with a degreasing agent to remove all dust, oil, and moisture.
2. Dry thoroughly: Ensure the surface is completely dry before proceeding.
3. Measure and cut: Use a sharp utility knife or saw to cut the 1-metre strip to your required length.
4. Peel the backing: Partially peel back the protective liner from the pre-applied self-adhesive tape.
5. Align and press: Push the 8mm channel firmly over the exposed edge until it seats completely.
6. Apply firm pressure: Squeeze firmly along the sloped sides of the foam strip to activate the high-bond adhesive against the edge.

If this is not the product you are looking for, take a look at the rest of our range of edge and corner protectors.