The smart way to buy rubber & plastics
Item Code: RC-S108
| Base material: | EPDM |
| Sponge material: | Expanded EPDM |
| Size: | 10mm x 20mm |
| Weight: | 0.14kg (per metre) |
| Base hardness (Shore A): | 70° |
| Sponge hardness (Shore OO): | 40° |
| Minimum length: | 11m |
| Full coil length: | 50m |
| Colour: | Black |
£5.15 exc. VAT per metre£6.18 inc. VAT
You save (%)
| Estimated Delivery: | 3 to 5 working days |
Price per metre
Minimum order quantity: 11m
Price Breaks
| Quantity | Price (exc. VAT) |
|---|---|
| 1+ | £5.15 |
| 50+ | £4.12 |
This EPDM sponge tailgate seal – 10mm x 20mm is a high-quality, aftermarket reproduction of OEM part number AHH7833M, for MG vehicles.
The base of this particular seal has a maximum width of 10mm and a height of around 4.8mm. The base is manufactured from solid EPDM rubber, with a shore A hardness value of 70°. This means it is a relatively firm rubber and provides a rigid structure running throughout the length of the strip, helping to reduce any potential warping. The sponge top section has a maximum width of 7mm and a height of 15.2mm. These measurements should be taken as the maximum size of this product as the high compression rate allows this product to easily fit in areas smaller than this. While compressing, the product will fill any irregular or uneven surfaces to provide a tight and secure seal.
This product has been designed, specifically, to be able to withstand a variety of impacts, while still maintaining its original shape. This ensures that you are able to get a lot of use out of the product without fear of warping or deterioration.
This seal is manufactured from high-quality EPDM rubber, due to the unique properties the material offers. EPDM offers outstanding resistance to heat, ozone, and weathering, while also offering good resistance to both polar substances and steam. EPDM also has excellent electrical insulating properties, and is able to withstand a range of chemicals from ketones and ordinary diluted acids, to alkalis. Lastly, EPDM provides an airtight and watertight seal.
This product can be cut using standard household tools to meet any size you require, and attached using one of our superglues.
If this is not the product you are looking for, take a look at the rest of our range of sponge rubber seals.
| Properties | Values |
|---|---|
| Application | Seals, surface protection, waterproofing, industrial, home use |
| Product | Sponge extrusion |
| Material | Expanded EPDM |
| Base hardness (Shore A) | 70° |
| Sponge hardness (Shore OO) | 40° |
| Colour | Black |
| Size | 10mm x 20mm |
| Density range | 0.5–0.9g/cm³ |
| Water absorption | 5% (max) |
| Compression set (22 hours) | 50% |
| Oven ageing (7 days at 70°C) | ±30% |
 |
|
|
| Datasheet | Adhesive Sponge Extrusions |
Item Code: RC-03035
Price: £436.67
Item Code: RC-003
Price: £239.81
Item Code: RC-3076
Price: £223.49
Item Code: RC-03017
Price: £334.23
Reviews
There are no reviews yet.